Ricoh Error Codes (SC 7xx) Part 6

The following is a list of the most common error codes for Ricoh, Gestetner, Lanier, and Savin products.  If you have an older copier and have updated to Windows 10, there are issues with Windows 10 printing and scanning we can help you with.

Use Ctrl F, or Edit > “Find On This Page”, and enter the error code you are looking.  Your error code will be highlighted in Yellow.  You can also click on Next to jump to the next occurrence of that error code.  Toward the bottom are Printer Controller Error Codes and Ricoh 3813 Copier Error Codes.

Once you know what the error is relating to, you can see if there is an obvious fix for the problem part. If you have errors you can’t fix, call my cell at (858) 231-5188, call our service department at (858) 271-9188, or see our contact page.  You can also provide excellent repair service

Sometimes you just need to bit the bullet and get a new, or one of our refurbished units to lease or buy.

SC-700
ADF P/U problem

SC-701
ADF P/U problem

SC-702
ADF feed in motor

SC-703
ADF transfer motor

SC-704
ADF feed out motor

SC-705
ADF bottom plate motor

SC-720
Finisher transport drive motor problem

SC-721
Finisher tray shift or shift motor problem

SC-722
Finisher jogger motor

SC-723
Finisher stack feed motor problem

SC-724
Finisher stapler hammer motor

SC-725
Finisher stack feed out motor

SC-726
Finisher shift/lift motor

SC-727
Finisher stapler rotation motor

SC-729
Finisher punch motor

SC-730
Finisher stapler position motor

SC-731
Finisher exit guide motor
Finisher exit open/close motor problem Aficio 1035, 1045

SC-732
Finisher up tray shift motor problem

SC-733
Finisher stack feed out motor
Finisher lower tray shift motor problem Aficio 1035, 1045

SC-734
Finisher lift motor
Finisher lower tray shift motor problem Aficio 1035, 1045

SC-735
Finisher exit guide motor
Finisher pre-stack motor Aficio 551, 551P, 700, 700P

SC-736
Finisher exit guide plate motor

SC-737
Finisher waste stapler full

SC-738
Finisher shift tray lift motor

SC-740
1000 sheet finisher error

• 01: Shutter error
• 02: Exit error
• 03: Upper exit plate error
• 04: Jogger motor
• 05: Stapler motor
• 06: Stapler hammer motor
• 07: Tray lift motor
• 08: Shift tray height sensor
• 09: Back up RAM
• 0A: Communication error

SC-741
1000 sheet finisher error in saddle stitch area

• 01: Position plate motor
• 02: Folder roller motor
• 03: Shutter guide motor
• 04: Booklet jogger motor
• 05: Stapler motor
• 06: Folder plate motor
• 07: Connector
• 08: Switch

SC-750
Interchange connection problem

SC-751
Bridge connection

SC-752
Finisher connection

SC-760
ADF gate problem

SC-770
Shift tray motor

*Other Model Available

RICOH MPC3503/MPC5503 RICOH MPC3504/MPC5504

Contact Us: 03-3341 6296 | 018-788 6296 | 018-228 6296